Address: Room 2901, Bldg 1, Zijin Plaza, Qingdao E&T Development Zone, Shandong 266555, China
FAX : +86-532-80980932
Mobile: 0086 13963970719 (whatsapp number)
printer and die cutter machine With chain feeding Main parameters Main assembly 1) 360 degree electrical phase adjustment, braking motor 0.37Kw, 200 dots coder. 2) pneumatic pump for ink supply. 3) pneumatic single unit lock, and the whole machine general lock. 4) units electrical moving with...
printer and die cutter machine
With chain feeding
Forme roller dia.
￠405mm(including forme thickness 6mm)
Forme roller length
Max. working speed
Max. printing size
Max. sheet size
Min. sheet size
Machine wall thickness
Main motor power
11 KW, 380V, 3phases, four lines
Moving motor power
0.37Kw, I=1:43, safety clutch, unit moving, 380V, 3phases, four lines
Ink distributing motor power
0.75Kw, I=1:43, 380V, 3phases, four lines
1) 360 degree electrical phase adjustment, braking motor 0.37Kw, 200 dots coder.
2) pneumatic pump for ink supply.
3) pneumatic single unit lock, and the whole machine general lock.
4) units electrical moving with electromagnetic safety clutch.
5) ink roller pneumatic lifting and automatic ink distribution.
6) pneumatic inking.
7) automatic counting.
8) moving safety alarm.
9) automatic lubricant supply.
10) units movement driven by the printing unit, and the die cutting unit is fixed, which improves the stability of the whole machine.
I. transmission system
1) adopting #45 steel as the material for the whole transmission gears, improving the stability and the lift, decreasing the noise.
2) adopting satellite flat type adjustment for the transmission, which improving the gears’ life and the accuracy of the printing.
II. feeding unit
1) chain feeding, there are dust-removing brush and paper pressing wheels at the front edge, which make it easy to feeding and can remove dust on the paperboard to improve the quality and definition of the printing.
2) The upper and lower feeding shafts are made of good quality steel, and have tested by dynamic balance. There are two pressing wheels on the upper shaft, they can impress the paperboard edges as well as feeding, which will be helpful for carton stitching.
III. printing unit
1) on the print unit, mounted terminal box controlling production counting, machine speed and displaying the products quantity.
2) The forme roller has been tested by dynamic balance, which makes it running stably. The printing distance can be adjusted manually, and can lock by itself, adjust arrange is 2-12mm. Also, there are coordinate lines on the forme roller, which makes it easy to paste the forme. And the forme roller can be adjusted in axial direction for 10mm.
3) Adopting 360 degree electrical adjustment, and can adjust during working or while stopping, VFD control. And two adjusting modes: automatic and manual, and during automatic adjusting, the parameters values can be set on the phases meter, then pressing related buttons to make it reach the right position automatically. What’s more, the unit locking cylinders make each unit can return the correction position after separating.
4) Special transmission mode makes the inking even, clear without ink depositing.
5) Pneumatic diaphragm pump supplying ink, and the ink quantity can be adjusted by air pressure, even ink supply, easy clean and saving ink.
6) Inking by rubber roller and anilox roller, and driven directly by the forme roller gear, which ensures the same linear speed.
IV. die cutting unit
1) Consisting of die roller and rubber mat roller, there is differential compensator which ensures the die cutting accuracy and keep the same linear speed with the die wheel.
2) The die roller is lower roller, knife 25.4X1.42mm, and the knife wheel shaft can be adjusted for 10mm right and left.
Phase adjustment mode is the same as that of printing unit, the rubber mat roller can be moved mechanically for 30mm right and left, and the rubber mat repair system is adopted.
If the high-end semi automatic chain feeding carton printing die cutting machine caters to your requirement, welcome to buy the quality products for sale with us. We're one of the professional manufacturers in China, and we will offer you unmatched prices and service.