Address: Room 2901, Bldg 1, Zijin Plaza, Qingdao E&T Development Zone, Shandong 266555, China
FAX : +86-532-80980932
Mobile: 0086 13963970719 (whatsapp number)
The use of Automatic Die Cutting Machine precautions
With the continuous development of China's economy, Automatic Die Cutting Machine in the industrial production process has become an indispensable kind of equipment, many people in the use of Automatic Die Cutting Machine, there is no attention to the use of Automatic Die Cutting Machine Note that this is likely to lead to shortened life of the Automatic Die Cutting Machine. In order to allow you to better reduce the use of Automatic Die Cutting Machine costs, the following Hade wins the staff to come to tell you about the use of Automatic Die Cutting Machine precautions.
1, adjust the knife-edge gap when not hit the knife-edge, to prevent the knife-edge crack. Adjust the knife gap when the general should be adjusted under the knife position, adjust the use of professional tools to loosen the blade base of the fastening bolts, left and right activities of the blade base to the appropriate location, and then tighten the bolts tighten.
2, the operator must be familiar with the general structure of the equipment and performance, prohibit the use of ultra-performance equipment. The operating platform on the mold has been precisely adjusted by the manufacturers after the positioning, non-special circumstances may not adjust the modulation.
3, adjust the knife on the knife and the same knife, according to the thickness of the cutting plate, the knife will be adjusted to the appropriate gap, the upper and lower roller in the knife alignment. Adjust the position of the tool in turn.
4, before the start of the workbench and the surrounding tools and work-related items clean up. Turn on the total power, and then turn on the speed control box switch, adjust the roll to speed. The shutdown procedure is reversed.
Automatic Die Cutting Machine to pay attention to the first to introduce here, before we introduced the Automatic Die Cutting Machine is not much knowledge, the latter will be based on the needs of everyone to update, hoping to help you.
In our daily life, Automatic Die Cutting Machine is one of our most common kind of die-cutting equipment, round knife die cutting is squeezed through the blade and pad to achieve the purpose of die-cutting. There are a lot of products, in our use of the process we have to maintain and maintain it, so that its life is not shortened, then we use the Automatic Die Cutting Machine when there is no thought to do to be able to ensure automatic Die machine life is not shortened? The following Hade wins the staff to come to tell you about the Automatic Die Cutting Machine maintenance methods.
1, die-cutting cartons will produce a large number of waste paper side, paper hair, a little attention will enter the chain drive parts, die-cutting mobile platform and some rotating parts, and may block the photoelectric detection head, causing failure The Therefore, we must take the Automatic Die Cutting Machine body clean and clean.
2, in strict accordance with the operating procedures for operation, the blade must always keep clean, no paint part of the anti-rust grease.
3, regularly check the repair switch, insurance, handle, to ensure its reliable work.
4, is strictly prohibited non-designated personnel to operate the equipment, usually have to do people off the plane stop.
Automatic Die Cutting Machine maintenance method for the time being for the first time to introduce here, before we rarely introduced the knowledge of Automatic Die Cutting Machine, the latter will be based on the needs of everyone to update the news on the Automatic Die Cutting Machine.